Training
Clinical safety training for all your staff.
A guided course on DCB0160 in three levels, from new starters to your Clinical Safety Officer. On demand, in your own time, with help at every step.
- In every ICS in EnglandWe work in every integrated care system, across all care sectors.
- Built from real post-deployment dataThe course draws on what happens once systems are live across the NHS.
01 The course
Three levels, one course.
Digital Clinical Safety is a course on DCB0160 for everyone who works with digital tools in health and care. Each level adds to the same ten parts, so staff take the level their role needs and nothing repeats as they move up.
- Mapped to NHS England’s curriculum
- From one hour for Essentials to six for Practitioner, on demand
- A final check and a certificate for each level
- EssentialsPassed 15 October 2026Certificate
- Intermediate4 of 12 parts done2 hours to go
- PractitionerOpens when you pass Intermediate6 hours
- Level 11 hour
Essentials
For everyone who works with digital tools in health and care.
The two standards and who is responsible, what a hazard is, how a risk is scored, and what happens after go-live.
- Level 23 hours
Intermediate
For people in a clinical safety role, or supporting someone who is.
How the work is done: writing a full hazard log entry, severity and likelihood in full, what to ask the supplier, and managing an incident.
- Level 36 hours
Practitioner
For Clinical Safety Officers, or those working directly in a clinical safety role.
The judgement calls: running a hazard workshop, deciding when a risk is as low as reasonably practicable, and reviewing a safety case report. Then four workshops where you build hazard logs in the same system you’ll manage them in.
02 How it’s taught
Learn by doing.
Short sections on real situations, each ending in a question, so staff practise the decisions DCB0160 asks of them.
Interactive learning.
Each section ends in a question about a real situation, such as an ambient scribe used outside its setup or an ICB funding a product for its area. A wrong answer is marked in red, explains why and lets you pick again. There is no score.
A clinician uses an ambient scribe for a consultation it was not set up for. Is that within scope of DCB0160?
Examples from the system you use.
Pick the kind of product you use, such as an AI scribe, online triage or the clinical record, and the worked examples follow it through the course, so the documents and records look like the ones you will meet.
- Current version
- Version 4
- Approved by, 3.3.2
- Dr Amar Patel, CSO, 12 May 2026
- Hazards recorded
- 14
Practise the real work.
Practitioner adds four workshops where you build hazard logs in the same system you’ll manage them in. You build and score entries from staff reports for a phone assistant, a document tool and an ambient scribe, then review a hazard log the way a reviewer would.
H-L-001A medication request is processed for a medicine the patient did not ask for
Fits around clinical work.
On demand, in your own time, on a computer or a phone. Progress saves at every question, and each part shows how long it takes.
- 1The Clinical Safety OfficerDone
- 2Clinical risk managementDone
- 3Safety documentationDone
- 4Scope of the safety assessmentSection 6 of 8
- 5Hazard assessment16 min
Notes that write themselves
Each right answer leaves one line, the rule to remember, in your notes to revise from.
A note of your own on any section
Add your own thoughts beside the course. They are private to you.
Search the level and your notes
Press Ctrl+K, or ⌘K on a Mac, to find anything in seconds. What you type stays on your device.
The standard’s own words
The clauses of DCB0160 are quoted where they apply, and you can search them too.
03 What’s covered
Ten parts and four workshops.
Each part maps to a module of NHS England’s practitioner level 3 curriculum.
- 01
The Clinical Safety Officer
Who the standards bind, who can hold the role, and who accepts the risk.
- 02
Clinical risk management across the lifecycle
The process the standard requires, and when it applies.
- 03
Safety documentation
The documents the standard requires and what each is for.
- 04
Scope of the safety assessment
What is assessed, where, and for whom.
- 05
Hazard assessment
How to describe a hazard, who to involve, and how controls work.
- 06
Risk assessment and acceptability
Scoring a risk, deciding whether it is acceptable, and saying why.
- 07
The safety case and safety case report
What the report is, when one is needed, and what it contains.
- 08
Testing evidence
Showing that a control exists and that it works.
- 09
Incident management and monitoring
Finding out what happens after go-live, and acting on it.
- 10
Decommissioning
Assessing the withdrawal of a product.
Practitioner workshops
- Workshop 130 minVoice care navigation
Build and score two hazard log entries for a phone assistant.
- Workshop 230 minDocument management and coding
Build and score two hazard log entries for a document tool.
- Workshop 315 minAmbient voice technologies
Build one hazard log entry for an ambient voice product.
- Workshop 410 minReview a hazard log
Find the errors a reviewer looks for, then turn to your own log.
04 Certificates
A certificate for every level.
Pass a level’s final check and you get a certificate that lists what the level covered. At Practitioner, your evidence links to your certificate, building a continuous record of your work as a CSO.
- A final check at the end of each level, which you can retake
- Your name and professional registration, the level and the date
- A PDF to download, and a link to share
- At Practitioner, an evidence trail: the hazards and safety case reports you approve, and your refreshers
covering the requirements of DCB0160 for organisations deploying and using health IT systems.
- 1The Clinical Safety Officer
- 2Clinical risk management across the lifecycle
- 3Safety documentation
- 4Scope of the safety assessment
- 5Hazard assessment
- 6Risk assessment and acceptability
14 October 2026. Level 3 of 3. Course version 1.0.
Questions.
Who is it for?
Everyone who works with digital tools in health and care. Essentials suits all staff, Intermediate suits people in a clinical safety role or supporting one, and Practitioner suits Clinical Safety Officers, or those working directly in a clinical safety role.
How long does it take?
About an hour for Essentials, three hours for Intermediate and six hours for Practitioner, including its workshops. It’s all on demand, and progress saves as you go.
Do the levels have to be taken in order?
It’s best to take them in order to build your understanding, but Intermediate is open without an Essentials pass. Practitioner opens once you’ve passed Intermediate.
How does it relate to NHS England’s curriculum?
The course is mapped to NHS England’s curriculum: each of the ten parts maps to a module of its practitioner level 3 curriculum.
Does it use our own systems or records?
The training uses anonymised post-deployment feedback we’ve captured and reviewed across systems and across the country, covering full lifecycles. Your certificates will be linked to your own records and evidence for your compliance documentation. You’ll practise creating documentation and hazards in the same format as our in-platform hazard logs, so you’re ready.
What does it cost?
It’s included in the Digital Estate Plan, or available on its own. Contact us and we’ll set your staff up.
Get your staff started.
Tell us who needs which level, and we’ll set them up.